================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了OPA的压随模式功能，输出端会输出和正端一样的电压值。

Function descriptions:
This example demonstrates the follower mode function of OPA, the output 
terminal outputs the same electrical output as the positive terminal value.
================================================================================
测试环境：
测试用板：PY32F420_STK
MDK版本： 5.41
IAR版本： 9.20
GCC 版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32F420_STK
MDK Version: 5.41
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译并下载程序；
2. PC2输入1V/2V/3V，PC15能输出1V/2V/3V.

Example execution steps:
1.Compile and download the program.
2.PC2 inputs 1V/2V/3V, PC15 can output 1V/2V/3V
================================================================================
注意事项：

Notes:

================================================================================